Camshaft End Plug - Metal

Camshaft end plug. With groove for original magnesium cases. All 1300-2000cc air-cooled models with camshaft plug groove. Cam plug.

Camshaft End Plug - Rubber

For many new air-cooled 1200-1600cc cases and stock Air-Cooled Vanagon cases. Check your case to determine if you need metal or rubber style. Cam plug...

Deluxe Engine Hardware Kit 10

EMPI. For 10mm case studs.

Deluxe Engine Hardware Kit 8

EMPI. For 8mm case studs.

Engine Bolt - Starter

This is the bolt that mounts the starter and is also one of the upper engine mounting bolts. All Beetle/Ghia, Bus 50-71, Thing, Ghia, Type 3.

Engine Bolt - Upper

Upper engine mounting bolt, on the drivers side ( not the starter bolt ). M10x70.

Engine Case Captive Nut Ea

Engine Mounting Bolt Kit

For mounting 1300-1600cc T1 style motors. Engine Bolt. Engine Stud.

Engine Mounting Bolts

EMPI. For 1971 and later Beetles, or late case using dog house type oil cooler.

Engine Stud Extra Long 10mm

BUGPACK. Pair. 10mm x 100mm studs solve the problem when adapting T2 trannys to new engine cases. Extra length allows the use of engine mount plates.

Exhaust Stud - Each

Exhaust Stud. 8mm. 45mm total length. Each.

Head Exhaust Stud 8mm Each

M8 x 38-40mm threaded exhaust stuf for heads. Each. Threaded throughout. ( AKA / N01444312 )

Lower Case Stud T1 Case - Each

These are the studs on the lower side of the 1600cc case on the flywheel side. EACH. M10x85. N144114 / N145251.

Lower Case Stud Vanagon/Bay

ORIGINAL CLASSIC PARTS. Engine Case to Transmission Mounting Stud. Bus 76-79 (091 bellhousing) and all Vanagon with manual transmission. 1976-91. Eac...

Oil Pressure Spring Bus/Van

Oil pressure relief spring. Each. Bus/Van 1972-91.

Oil Pressure Spring Kit & Case Hardware

Oil pressure spring hardware and case hardware. Flat head type dual oil relief plugs. Includes lower case studs, oil pressure pistons, oil pressure sp...

Oil Relief Piston T2 72-79 Van

T2 72-79, Van 80-83.

Stud Step 8-10mm x 38mm

8mm to 10mm. 38mm long. Each.

Stud Step 9-8mm x 56mm

Stock Step Stud for Exhaust Ports on 1800 & 2000 Air Cooled Engines. This stud DOES NOT originally fit 1700 Engine Cylinder Heads which are NO LONGER ...