
AN6 Fitting - M16x1.5
One end is threaded M16x1.5, the other end is threaded AN6. Will require o-ring or gasket.
One end is threaded M16x1.5, the other end is threaded AN6. Will require o-ring or gasket.
One end is threaded AN6, the other end is barbed to accept press on 3/8" rubber hose.
One end is threaded M16x1.5, the other end is threaded AN8. Will require o-ring or gasket.
One end is threaded AN8, the other end is barbed to accept press on 1/2" rubber hose.
Boot for oil breather tube. Beetle 50-79, Ghia 56-74, Bus 50-79, Type 3 61-74, Thing 73-74. This boot goes at the bottom of the oil filler, it catc...
EMPI brand. Reduce crank case pressure, eliminate blow-by and oil loss. High revving modified engines require more crankcase ventilation than the sto...
Seal for Vanagon dipstick tubes. For Air-Cooled and Water-Cooled Vanagon engines.
Vanagon 1.9L & 2.1L 2WD. The seal for this tube is # N90033204, sold seperately.
Vanagon 1.9L & 2.1L 4WD. The seal for this tube is # N90033204, sold seperately.
EMPI. The Empi dual purpose oil filler and breather box includes a system of internal baffles that seperate the oil from the air then returns the oil ...
To 1970 w/flat cam gear. With filter. Replacement filters are : W719/5 or 72161WS.
1971 + w/dished cam gear. With filter. Replacement filters are : W719/5 or 72161WS
EMPI. Full flow oil pump , for 1971-79 with dished style camshaft. Add a conventional oil filter to your engine with this 32mm gear oil pump with 1/4...
EMPI. 1967+ with 8mm stud holes. Billet aluminum oil pump cover for full flow applications. 6061-T6 aluminum. 8mm holes.
EMPI. 1967+ with 8mm stud holes. Aluminum oil pump with 31.9mm gears for maximum capacity, providing increased oil pressure, flow, and volume. Include...
EMPI. Full flow oil pump , for 1961-70 with flat style camshaft. Add a conventional oil filter to your engine with this 32mm gear oil pump with 1/4" N...
EMPI. Put your cooler fan on autopilot with this fan thermostat. Attaches to the inlet port of the oil cooler or it can be spliced into existing 1/2" ...
Pages: |