
Fuel tank to "T" fitting, 1968-1977 standard Beetle, measures 15mm (9/16") I.D. X 213MM (8 3/8") long, made in Germany.
Fuel evaporative hose, connects "T" fitting to main exit, 1971-1972 Super Beetle, made in Germany.
Fuel evap hose , elbow that connects filler neck to "T" fitting, 1973-1979 Super Beetle, made in Germany.
Fuel evaporative hose elbow, connects "T" fitting to main exit, 1973-1979 Super Beetle, made in Germany
Vanagon fuel Evap / Expansion tank. Left. Float and float seal sold seperately. Float is # 251201311B. Seal is # N90105501. " Vapor Tank "
Vanagon fuel Evap / Expansion tank. Right. Float and float seal sold seperately. Float is # 251201311B. Seal is # N90105501. " Vapor Tank "
This is found on all 72-73 and some 74-76 Buses. It is an approximately 330 mm long angled hose and fits Buses that have a rubber hose connecting dire...
Fuel tank filler hose. Bus 1968-1971, Wolfsburg West. 57mm ID. 180mm long. Measure yours to determine the length you require.
Fuel tank filler hose. Bus 1968-1971. Made by JP Group of Denmark. 57mm ID. 120mm long. Measure yours to determine the lengh you require.
Each. Inner seal for gas filler neck hose. Seals filler neck hose to steel connector, 4 required for standard Beetles, 2 for Super Beetle.
Vanagon Syncro fuel filler hose. This application demands very specific inside and outside diameters, in addition to being fuel rated and reinforced t...
This is found on all 76-79, and some 72-75. This is for Buses that have a metal pipe going from the fuel filler neck toward the tank. (See picture.) I...
Beetle 68-77. 45mm inner diameter. Aprox 220mm length. For Standard Beetle you will need 2. Only one is required for super beetle.
Beetle 1972-79 fuel filler neck. Not Super Beetle. By special order only.
Beetle 1955-61. Screen included, just not shown in pic. 111209021E / 111209021F.
FUEL VALVE, 1955 (1955 Bus, starting at chassis # 20-117903) -1967 Bus, German **Please note: The reserve function for this item is reversed. The knob...
EMPI. Replacement fuel tank mounting bracket for aluminum off-road tanks. 8" diameter, mounting holes 4" apart, 3/4" wide.
Early 1968 T1 (To Vin 1x8 431 163).
Fuel Tank Breather Pipe Sleeve.
Standard Beetle 68-77, Super Beetle 1971-72, Ghia 68-74. Tee to tank. Aprox 14mm inner diameter.
Pages: |