Engine Mounting Bolt Kit
Engine Mounting Bolt Kit. For mounting 1300-1600cc Beetle style engines. Both upper engine bolts and lower case studs.
N144114 (N145251 N0145251) / ...
Engine Mounting Bolt Kit. For mounting 1300-1600cc Beetle style engines. Both upper engine bolts and lower case studs.
N144114 (N145251 N0145251) / ...
EMPI. Engine Mounting Bolts. For 1971 and later Beetles, or late case using dog house type oil cooler. 9551 / 00-9551-0
BUGPACK. Pair. 10mm x 100mm studs solve the problem when adapting T2 trannys to new engine cases. Extra length allows the use of engine mount plates. ...
M8 x 38-40mm threaded exhaust stud for heads. Each. N01444312
Threaded throughout.
These are the studs on the lower side of the 1600cc case on the flywheel side. EACH. M10x85. N144114 / N145251 / N0145251
ORIGINAL CLASSIC PARTS. Engine Case to Transmission Mounting Stud. Bus 76-79 (091 bellhousing) and all Vanagon with manual transmission. 1976-91. Eac...
Oil pressure spring hardware and case hardware. Flat head type dual oil relief plugs. Includes lower case studs, oil pressure pistons, oil pressure sp...
Stock step stud for exhaust ports on 1800 & 2000 air-cooled Bus, and air-cooled 2000cc Vanagon heads. N146841 / N0146841 / 1075-100
Bus 1974-79. Vana...
EMPI. Copper Head Gaskets , set of 4. 90.5mm/92mm. 0.040". For adjusting deck height / compression ratio. Head Spacers. 16-9529
EMPI. Copper Head Gaskets , set of 4. 90.5mm/92mm. 0.050". For adjusting deck height / compression ratio. Head Spacers.
EMPI. Copper Head Gaskets , set of 4. 90.5mm/92mm. 0.060". For adjusting deck height / compression ratio. Head Spacers.
EMPI. Copper Head Gaskets , set of 4. 94mm. 0.040". For adjusting deck height / compression ratio. Head Spacers.
EMPI. Copper Head Gaskets, set of 4. 94mm. 0.050". For adjusting deck height / compression ratio. Head Spacers. 16-9533
EMPI. Copper Head Gaskets , set of 4. 94mm. 0.060". For adjusting deck height / compression ratio. Head Spacers.
EMPI. Set of 4. Easy installation without removing the cylinders. Steel. 0.030". 3.3" ID, 3.7" OD. 21-5008-0
EMPI. Set of 4. Easy installation without removing the cylinders. Steel. 0.040". 3.3" ID, 3.7" OD.
EMPI. Set of 4. Easy installation without removing the cylinders. Steel. 0.060". 3.3" ID, 3.7" OD. 21-5009-0
New from GDP, forged 36hp ratio rockers.
1.15:1 ratio (stock 36hp is 1:1) for a decent gain without need to clearance pistons for valve clearance. Se...
ORIGINAL CLASSIC PARTS. Case Saver. Each. For 8mm studs. OD 12mm ID 8mm. Length 29mm.
Pages: | |